Loss-In-Weight Feeding
Powder Filling Systems
Pneumatic Conveying
Bulk containers
Bulk Bag Loading/Unloading
Lump Breakers & Crushers
crushing.
Screw Feeding
Bag Emptying & Sack Disposal Equipment
Mixing
Sifting
Silo
Milling
Materials handling equipment for powders and bulk solids
Klausen Process Machinery designs, manufactures and supplies materials handling equipment for plants that receive, store, transfer, dose and blend dry powders and granules. From our workshop in Kings Park, Sydney, we support food, dairy, chemical, pharmaceutical, plastics, minerals and building products manufacturers across Australia and New Zealand with individual machines, complete lines and the parts and service to keep them running.
Powders rarely behave the way a brochure suggests. Some flow like water, others bridge, cake, smear or fluidise, and many change with humidity and temperature. Good materials handling equipment is chosen around those properties first, then around the rate, the hygiene standard and the space available. That is the approach our team takes on every enquiry, whether it is a single bag tip station or a fully automated intake-to-packing line.
017 types of materials handling equipment we supply
Most powder lines are built from a handful of proven building blocks. The right combination depends on how your raw materials arrive, how much you process per shift and where the product goes next.
- Bag tip stations. Dust-controlled bag emptying stations with integrated extraction and optional sack compactors for 20–25 kg sacks.
- Bulk bag unloaders and fillers. Frames, hoists, massagers and spout clamps for emptying and filling FIBCs safely, see our bulk bag systems.
- Mini bulk containers. Dura-Bin IBCs for storing, moving and discharging ingredients between process stages without re-bagging.
- Screw feeders and conveyors. Simple, enclosed screw feeding for metering or transferring powders over short distances.
- Loss-in-weight and volumetric feeders. Duraflex auger feeders with flexible wall hoppers for accurate continuous dosing into mixers, extruders and packing lines.
- Pneumatic and vacuum conveying. Enclosed pipelines that move powder between floors and buildings with minimal dust.
- Conditioning and mixing equipment. Lump breakers, sifters and ribbon, paddle or high-shear powder mixers that prepare and blend materials to specification.
We also supply silos, Duraflex auger fillers and Hosokawa Alpine fine grinding and air classifying systems, plus a range of used process machinery for budget-conscious projects.
02How to choose the right materials handling equipment
Selecting materials handling equipment is easier when you work through the same questions an engineer would ask. Answering them early avoids undersized feeders, blocked hoppers and expensive changes once the plant is built.
- Material behaviour: bulk density, particle size, moisture, abrasiveness, stickiness and whether the powder is fragile or combustible.
- Throughput: the rate per hour, batch sizes and how many shifts the line runs.
- Packaging format: sacks, bulk bags, IBCs, drums or bulk tanker deliveries all need different intake equipment.
- Hygiene and cleaning: food and pharmaceutical duties may need stainless steel contact parts, quick-release fittings and smooth, crevice-free surfaces.
- Accuracy: how tightly ingredients must be dosed, and whether batch or continuous weighing is required.
- Space and access: ceiling heights, floor loadings, forklift routes and room for maintenance.
Sending us a product sample and a simple sketch of your process is often the quickest way to narrow the options. Where flow behaviour is uncertain, a trial helps confirm the right hopper geometry, feeder type or conveying method before you commit.
03Integrating materials handling equipment into a complete line
Individual machines only perform well when the interfaces between them are right. A bag tip station must discharge into a feeder that can cope with surges; a conveyor must deliver at the rate the mixer needs; a filler must receive a consistent, de-aerated blend. Because KPM builds and supplies each of these items, we can design the transitions, control signals and dust extraction as one system rather than leaving gaps between suppliers.
Our design and layout service produces general arrangement drawings so you can see how the materials handling equipment fits the building before anything is fabricated. Once the scope is agreed, our team can manage manufacture, delivery and on-site installation and commissioning.
Safety and compliance considerations
Lifting and tipping heavy sacks is one of the most common causes of injury in powder plants. Well-designed materials handling equipment reduces manual tasks by putting bags at a comfortable working height, using hoists for bulk bags and removing repetitive scooping. Safe Work Australia's model code of practice for hazardous manual tasks is a useful reference when reviewing your current handling methods.
Dust control is equally important. Enclosed transfer points, local extraction and correctly earthed equipment help keep operators safe and the plant clean, and where powders are combustible they form part of a broader dust explosion risk assessment.
04Servicing, spare parts and upgrades
Materials handling equipment works hard, often in abrasive or wash-down environments. KPM services a wide range of process machinery and supplies replacement parts such as screws, seals, filters, valves and wear components. Planned maintenance visits help catch worn flights, leaking seals or failing bearings before they cause unplanned downtime.
If your existing line is struggling to keep up, an upgrade can be more economical than starting again. Common improvements include adding a feeder to control flow, replacing manual scooping with a bag tip station, automating transfers with conveying, or retrofitting dust extraction. We can assess older materials handling equipment on site and recommend whether to repair, modify or replace it.
05What to expect when you enquire
Every project is different, but most enquiries for materials handling equipment follow a similar path from first conversation to production.
- Initial discussion. We talk through your product, rates, packaging and the problem you want to solve.
- Sample review or site visit. Where needed, we look at the material and the space to understand access, services and constraints.
- Proposal. You receive a clear scope, equipment description and budget so you can compare options.
- Detailed design. Drawings are confirmed, including interfaces with your existing plant and controls.
- Manufacture and delivery. Equipment is fabricated and checked before it leaves our workshop.
- Installation, commissioning and training. Our technicians set up the system, prove it with your product and train your operators.
Keeping one team involved from start to finish means fewer misunderstandings and a single point of contact if anything needs adjusting after start-up. It also makes it simpler to add more materials handling equipment later, because the original drawings, control logic and spare parts records are already on file with us.
Construction materials and finishes
The right construction makes a big difference to service life. Abrasive minerals may call for wear-resistant liners or hardened screws, while sticky food powders benefit from polished internal surfaces and generous radii. Wash-down areas need sealed motors, drainable frames and fasteners that will not trap residue. We specify these details to suit the duty so your materials handling equipment stays reliable and easy to clean for years.
06Industries that rely on our materials handling equipment
- Food and dairy: flours, sugars, milk powders, starches and seasonings, where hygiene and allergen control matter.
- Chemicals and pharmaceuticals: fine, dusty or potent powders that must be contained and dosed accurately.
- Plastics: pellets, regrind and additives fed to extruders and moulding machines.
- Minerals and building products: abrasive, dense materials such as cement, sand, lime and fillers.
Each sector brings its own priorities, so we tailor the construction materials, finishes and controls to suit the duty rather than offering a one-size-fits-all machine.
07Materials handling equipment FAQs
Can you supply a single machine as well as a complete line?
Yes. Many customers buy one piece of materials handling equipment, such as a bulk bag unloader or screw feeder, to solve a specific problem. Others ask us to design and supply the whole line from intake to packing.
Do you service equipment you did not supply?
In many cases, yes. KPM services a range of process machinery and can source or manufacture replacement parts. Contact us with the make, model and photos so we can advise.
Is your materials handling equipment available in stainless steel?
Yes. Product contact parts and frames can be built in stainless steel for food, dairy and pharmaceutical duties, or in mild steel where hygiene is less critical.
Can you test my powder before I buy?
Where it is practical, we can review samples and arrange trials so the materials handling equipment is matched to how your product really behaves.
Need help choosing or maintaining materials handling equipment? Contact Klausen Process Machinery to discuss your process, or browse our full range of products.

Bag tip stations
Bulk bag systems
Screw feeders
Loss-in-weight feeders